Your Vehicle :
Change
Start Here
Select Your Vehicle

Product was successfully added to your shopping cart.

Brake Kit

Brake Kit

Brake Kit Buyer's Guide

What is a Brake Kit?

Installing a reliable big brake kit (BBK) is recommended for drivers who enjoy motorsports, as well as those who want to experience greater safety on the road. A high-quality brake system is vital to ensuring safety when stopping your car or decreasing speed while driving. You can buy genuine Mopar brake kits from AllMoparParts at discounted rates.

Should You Install a High-performance Big Brake Kit?

A big brake kit is composed of the brake pads, lines, caliper, mounting hardware, and disc. Along with your tires, installing high-performance BBKs can ensure your safety when decreasing speed, coming to a sudden halt, or avoiding obstructions in your path.

BBKs provide additional benefits, including shorter stopping distances, improved brake modulation, a firmer brake pedal, and less brake fade in your system. These components also lessen dynamic brake fades, which can be hazardous if not properly remedied.

Whereas stock brakes have a jerking feel when they’re suddenly slammed due to interference from the anti-lock braking system (ABS), a BBK will seamlessly bring your vehicle to a complete stop. Need a smoother ride? Order genuine Mopar Performance Big Brake Kits from AllMoparParts for select Chrysler, Dodge, and Jeep vehicles today!

Tips on How to Choose a Brake Kit

When choosing a brake system for your vehicle, you’ll need to take into account fitment and compatibility.

Fitment

When considering fitment, the following factors need to be taken into account:

  • Wheel size

  • Tire type

  • Brake line and hose quality

  • The brake balance of your car

Make sure to familiarize yourself with the proper brake balance of your car before installing strong brakes. Fitting your car with strong brakes that will upset its brake balance could lead to unsafe handling problems.

Compatibility

Cars have different wheel and rotor sizes, brake clearances, and specific braking needs. Big vehicles like trucks, vans, and SUVs are much heavier and need heavy-duty brake pads for safer braking. Sports cars often use semi-metallic or high-performance ceramic brake pads for decelerating or braking in a pinch.

Brake Kits: Repair or Replace?

The longevity of brake pads vary from vehicle to vehicle. Some pads can only last after 25,000 miles, while others can last after 50,000 or even 75,000 miles before needing to be replaced. It is best to check the owner’s manual of your car to know how often you should replace the brake pads.

One sign that you should replace the brake pads of your car is if the pads are starting to grow thin. If you hear squealing or scraping noises whenever you brake, it means that the metal hairs at the bottom of the pads are scratching the brake rotors since the pad material is starting to thin. If you experience jittery braking, it could mean that the rotors of the brakes are warped. It is better to replace the rotors instead of grinding down its surfaces since this is a cheaper, easier, and safer option.

How to Install a Brake Kit

  1. First check the brake fluid level of your car. Remove some fluid if it’s full to avoid spillage during the compression of the caliper piston later.

  2. Loosen the lug nuts of the wheels and then raise the vehicle using a jack.

  3. Proceed to remove the wheels as well as the brake calipers.

  4. Remove both the pads and the rotors. Some vehicles require you to remove the caliper mounting bracket first before removing the rotor.

  5. Clean the rotor mounting surface to rid it of rust and debris to ensure that the new rotor sits flush.

  6. Clean and mount the new rotor on the clean rotor surface.

  7. Replace brake hardware using a proper brake tool kit. Apply brake lubricant at the slider contact points before installing the new hardware.

  8. Install the new pads. Make sure that these pads have the proper wear-sensor position orientation.

  9. After installing the pads, check the pistons and brake calipers to see if there are fluid seepages.

  10. Reinstall the calipers. Remember not to overtighten the caliper bolts.

  11. Refill the brake fluid reservoir to its optimal level.

  12. Slowly bleed the brakes to ensure that the brake fluid is flowing properly.

  13. Install the wheel back and repeat the process for the remaining wheels.

  14. Go for a test drive to break in the new set of brakes.

Frequently Asked Questions about Brake Pads

Here are the frequently asked questions about Brake Kits.

How long do brake pads and rotors last?

Most brake pads last between 30,000 and 70,000 miles, while rotors last for about three times as long. However, this is not a rule of thumb since these components can be affected by various factors like driving conditions, weather, corrosion, and the like.

Can I reuse brake pads?

Reusing old brake pads on new rotor discs is possible. However, the old pads can take some time to wear the surface of the new discs significantly. It is still advisable to replace older pads when necessary, as they prove to be safer and more cost-effective.

Get Top-notch OEM Big Brake Kits Today

Keep your car’s components intact and protected when decreasing speed or stopping by purchasing a premium Mopar big brake kit from AllMoparParts. We carry top notch OEM brake line kits and auto parts for select Chrysler, Jeep, and Dodge models at reduced prices, ensuring greater savings.

Numerous Mopar BBKs are available for the Dodge Challenger, Dart, Charger, and Magnum. We also carry authentic Mopar big brake kits and car components for Chrysler 300 models. If you need brake system parts for your Jeep, we offer a great selection of brake kits for both Jeep Wrangler JK and JL models.